No.

Title

Lecturer Names

Produced / published on

Year

Presentation/

Publication

Level

Local

National

International

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

1

A new optimization approach based on Kriging interpolation and sequential quadratic programming algorithms for refractory titanium alloys

Armansyah Ginting

Applied Soft Computing Journal

2011

√

2

Characteristics of aeronautical material under orthogonal dry cutting

Armansyah Ginting

International Conference On Advanced Materials Research

2011

√

3

Experimental Study of Vibration Signals for Detection of Cavitation Phenomena Using Acceleration Derivatives ( Jerk ) in Centrifugal Pumps

Ikhwansyah Isranuri

Dynamic Journal, Volume 1, No.9

ISSN: 0216-7492

2011

√

4

Study of Sound Adsorption Coefficients from Composite Materials of Palm Sawtooth Fiber and Gypsum as Sound Absorbing Materials Using Tube Impedance Method

Ikhwansyah Isranuri

2011

√

5

Experimental Study of Vibration Signals for Detection of Cavitation Phenomena Using Acceleration Derivatives ( Jerk ) in Centrifugal Pumps

Tugiman

Dynamic Journal, Volume 1, No.9

ISSN: 0216-7492

2011

√

6

Producing Cooling From Solar Energy By Using Adsorption Cycle With Activated Carbon And Methanol Pair

Himsar Ambarita

Dynamic Journal, Volume 1, No.9

ISSN: 0216-7492

2011

√

7

Effect of Addition to Surface Roughness and Micro Aluminum Structure

Suprianto

Dynamic Journal, Volume 1, No.9

ISSN: 0216-7492

2011

√

8

Effect of Addition to Surface Roughness and Micro-Aluminum Structure

Ikwansyah Isranuri

Dynamic Journal, Volume 1, No.9

ISSN: 0216-7492

2011

√

9

Numerical simulations of Pf composite materials are strengthened by OPEFB fibers in the fracture area due to high strain rate impact loads

Bustami Syam

Proceedings of a scientific seminar in the framework of USU’s 59th Anniversary

2011

√

10

The manufacture and investigation of damage patterns of GFRP composite Sandwich boards with polymeric foam cores reinforced by OPEFB fibers due to free fall impact loads

Bustami Syam

Proceedings of a scientific seminar in the framework of USU’s 59th Anniversary

2011

√

11

The response response of the Pf composite material is reinforced by pipe-shaped oil palm empty fruit bunches (EFB) due to impact loads

Bustami Syam

Proceedings of a scientific seminar in the framework of USU’s 59th Anniversary

2011

√

12

Analysis of mechanical properties and failure of Pf composite materials reinforced OPEFB fibers in the form of pipe static pressure load

Bustami Syam

Proceedings of a scientific seminar in the framework of USU’s 59th Anniversary

2011

√

13

The decay form of Pf composite board is reinforced by oil palm empty fruit bunches (OPEFB) due to free fall impact loads

Bustami Syam

Proceedings of a scientific seminar in the framework of USU’s 59th Anniversary

2011

√

14

Design of Pelton Turbine for Laboratories

Sitepu’s determination

Dynamic Journal, Volume 1, No.9

2011

√

15

Study on the Effects of Switching Temperature on the Thermal Fatique Life of Shell – to-skirt of coke drum.

Himsar Ambarita

Journal of Pressure vessel Technology

2011

√

16

Biomaterial

INDRA

USU Press

2011

√

17

Exergy analysis for day lighting, electric lighting and space cooling systems

for a room space in a tropical climate

Taufiq Bin Nur

Energy and Buildings 43 (2011) 1676–1684

2011

√

18

Geothermal Energy: A Guide For The Perplexed

Mulfi Hazwi

Proceding Internatioanl Seminar on Regional Economic Development Through Science, Technology, and Art

2012

√

19

Geothermal Energy: A Guide For The Perplexed

Farida Ariani

Proceding Internatioanl Seminar on Regional Economic Development Through Science, Technology, and Art

2012

√

20

Experimental Study on the Effect of Fly Ash Composition on Tensile Strength and Microstructure Metal Matrix Composite (MMC)

Tugiman

National Seminar on Technology and Exhibition Supports MP3EI

2012

√

21

Study of the influence of Type Gating System Against Hardness and Microstructure of Aluminum Castings A356-Sic Using the Stir Casting Method

Suprianto

National Seminar on Technology and Exhibition Supports MP3EI

2012

√

22

Preventive Maintenance Study on Hoode SystemAnode Baking Crane At Pt. Inalum with a lifting capacity of 6.780 tons and a lifting height of 7.5 meters

Alfian Hamsi

Dynamic Journal, VolumeII, No.10

ISSN: 0216-7492

2012

√

23

Optimizing Thermal Efficiency Boilers Use Fiber and Palm Shell as Fuel

Mulfi Hazwi

Dynamic Journal Volume I, No.11

ISSN: 0216-7492

2012

√

24

Design and Testing of Cocoa Dryers with the Type of Cabinet Dryer for a Capacity of 7.5 Kg Per-Cycle

Farel H. Napitupulu

Dynamic Journal, VolumeII, No.10

ISSN: 0216-7492

2012

√

25

Study of the Application of Cold Water to the Air Conditioning Room; Case Study in Medan City

Himsar Ambarita

Dynamic Journal, VolumeII, No.10

ISSN: 0216-7492

2012

√

26

Analysis of the effect of the load on the wear rate of Al-Si Alloy with the Pin On Disk Test method

Suprianto

Dynamic Journal, VolumeII, No.10

ISSN: 0216-7492

2012

√

27

Analysis of the effect of the load on the wear rate of Al-Si Alloy with the Pin On Disk Test method

Ikwansyah Isranuri

Dynamic Journal, VolumeII, No.10

ISSN: 0216-7492

2012

√

28

Solar Energy Cocoa Drying Testing

Sitepu’s determination

Dynamic Journal, VolumeII, No.10

ISSN: 0216-7492

2012

√

29

Preliminary Study of Bubble Studies in Centripugal Pumps Measured With Vibration Signals

Ikwansyah Isranuri

Dynamic, Volume I, No.11 Journal

ISSN: 0216-7492

2012

√

30

Efficiency Analysis of Hydrogen Speed and Fan Speeds in Micro Channel Cellular Fuel CellsElectrolyte Membrane Capacity of 20w

Himsar Ambarita

Dynamic, Volume I, No.11 Journal

ISSN: 0216-7492

2012

√

31

Study of the Utilization of Solar Water HeatersSimple Type of Boxes Equipped with Thermal Storage Solar Water Heaters

Himsar Ambarita

Dynamic, Volume I, No.11 Journal

ISSN: 0216-7492

2012

√

32

Design of Solar Water Heater Simple Type of Box Equipped with Phase Change Material with a Capacity of 100 Liters of Water

Be sincere B.Sitorus.

Dynamic, Volume I, No.11 Journal

ISSN: 0216-7492

2012

√

33

Design of Solar Water Heater Simple Type of Box Equipped with Phase Change Material

Himsar Ambarita

Dynamic, Volume I, No.11 Journal

ISSN: 0216-7492

2012

√

34

Study of Generated Voltage and Consumption

Hydrogen in Fuel Cells Membrane Electrolyte Membrane Capacity of 20 W

Sitepu’s determination

Dynamic, Volume I, No.11 Journal

ISSN: 0216-7492

2012

√

35

Design of Hydram Pump and Testing of the Influence of Variations in the Height of Air Pipes and Lengths of Incoming Pipes to the Performance of Hydrant Pumps

Sitepu’s determination, Daniel Ortega Panjaitan

Journal of e- Dynamic, Volume II, No.2

ISSN 2338-1035

2012

√

36

Preliminary Study on Optimizing Propeller Design of Unmanned Aircraft to Get Low Noise Characteristics Based on Decrease in Noise Generation Mechanismwith Fluid Flow Simulation Simulation

Ikhwansyah Isranuri

Journal of e- Dynamic, Volume II, No.2

ISSN 2338-1035

2012

√

37

Testing of Discharging Process of a Solar Energy Water Heater Simple Box Type Equipped with Phase Change Material with a Capacity of 100 Liters of Water

Himsar Ambarita

Journal of e- Dynamic, Volume II, No.2

ISSN 2338-1035

2012

√

38

Testing of Discharging Process of a Solar Energy Water Heater Simple Box Type Equipped with Phase Change Material with a Capacity of 100 Liters of Water

Himsar Ambarita

Journal of e- Dynamic, Volume II, No.2

ISSN 2338-1035

2012

√

39

Drag Coefficient Analysis on Energy Saving Cars “Usu Engine”

Using Cfd Software

Himsar Ambarita

Journal of e- Dynamic, Volume 3, No.3

ISSN 2338-1035

2012

√

40

Maximum Natural Deflection And Frequency Analysis Of Reachstacker Booms With Variable Changing Arm Angles, Maximum Arm And Load

Tugiman Karmani

Journal of e- Dynamic, Volume, No.3

ISSN 2338-1035

2012

√

41

Designing clothes hangers through the quality function deployment method

Bright UHSG

Journal of Industrial Engineering systems, vol. 14, No.2

2012

√

42

Malaysian Academic Initiatives To Develop Endustry-Ready Engineers,

Muhammad Sabri

Altair Conference, Marriott Hotel Kuala Lumpur

2012

√

43

Analysis of the birth of noise from motorized vehicle tires

Muhammad Sabri

National Seminar of MP3EI Lustrum 50 Years Deprt. USU FT Mechanical Engineering

2012

√

44

Analyze Pressure Drop on Fuel Oil Boiler Piping System on North Sumatra Sicanang – Belawan Pt.Pln Generation Using Pipe Flow Expert

Sitepu’s determination

Journal of e- Dynamic, Volume 3, No.3

ISSN 2338-1035

2012

√

45

Mechanical Behavior Investigation of Polymeric Foam Golf Balls Reinforced by Oil Palm Empty Fruit Bunches (Tks) and Nylon Caused Static and Impact Presses

Bustami Syam

Journal of e- Dynamic, Volume 3, No.3

ISSN 2338-1035

2012

√

46

Performance Test of Otto One Cylinder Engine with Premium Fuel and Pertamax Plus

Himsar Ambarita

Journal of e- Dynamic, Volume 3, No.3

ISSN 2338-1035

2012

√

47

Design of Baby Incubator Using Phase Change Material as a Heating Room for Baby Incubators

Himsar Ambarita

Journal of e- Dynamic, Volume 3, No.3

ISSN 2338-1035

2012

√

48

The strength of non-standard motorcycle helmets due to free fall impact loads

Bustami Syam

Proceedings of a scientific seminar in the framework of USU’s 60th Anniversary

2012

√

49

Quality improvement of total productive maintenance (case study: PT. Bahari Dwikencana Lestari) Aceh Tamiang-NAD

Bustami Syam

Proceedings of a scientific seminar in the framework of USU’s 60th Anniversary

2012

√

50

FEM application to analyze Superhaeater Tube Failure Using Ansys V.12.0

Bustami Syam

Proceedings of a scientific seminar in the framework of USU’s 60th Anniversary

2012

√

51

Simulation of voltage distribution of the parking structure of the composite polymeric foam material reinforced by empty palm fiber bunches (OPEFB) due to free fall impact

Bustami Syam

Proceedings of a scientific seminar in the framework of USU’s 60th Anniversary

2012

√

52

Inalum as Locomative in Enhancement of Added Value for Aluminum Industry in Supporting Program of MP3EI

Awaluddin Thayab

International Seminar on Regional Economic Development Through Science, Technology, and Art.

2012

√

53

Crack propagation and Remaining Life Assessment of Coke Drums Due to Thermal Stress

H i msar Ambarita

Journal of Thermal Stress

2012

√

54

Numerical study on Characteristics of Stress Distribution of Shaped-Shaped Tubular Bellows

Ambarita HImsar

Mem. Managing Inst.Tech.

2012

√

55

Feasibility Study of SOFC as Heat and Power for Buildings

Taufiq bin Nur

10th European SOFC Forum 2012

2012

√

56

Suitable Operational Strategy to Utilize Wasted Heat from micro-CHP systems

Taufiq bin Nur

The Society of Chemical Engineers, Japan, The 44th Autumn Meeting

2012

√

57

Academic Policy Department of Mechanical Engineering Quality Management System

Ikhwansyah Isranuri

Pustaka Bangsa Press, Medan-Indonesia. ISBN 978-602-17368-0-7

2012

√

58

Analysis L finally noise from the B end of the motor

Muhammad Sabri

National Seminar on Technology and Exhibition Supports MP3EI

2012

√

59

Analysis of Ergonomic Palm Oil Harvesting Repair Tools

Indra

National Seminar on Technology and Exhibition Supports MP3EI

2012

√

60

Effect of Welding Flow Variations on Mechanical Properties and Toughness of Las Smaw with NSN 308 Electrodes

Alfian Hamsi

National Seminar on Technology and Exhibition Supports MP3EI

2012

√

61

Characteristics of Energy Efficiency The edited cityas source of energy The refrigeration cycle forcooling the air ( AC )

Himsar ambarita

National Seminar on Technology and Exhibition Supports MP3EI

2012

√

62

Numerical Study of Design Improvement in Flow Direction Jump P Nozzle

Himsar ambarita

National Seminar on Technology and Exhibition Supports MP3EI

2012

√

63

Analysis of Hybrid Desiccant Pump Heat and Solar Pump as Dryer of fermented Cocoa Beans

Himsar ambarita

National Seminar on Technology and Exhibition Supports MP3EI

2012

√

64

Hybrid Drying Equipment Performance Test Solar Kalordan Pump as Dryer of Cocoa Beans that have been fermented

Himsar ambarita

National Seminar on Technology and Exhibition Supports MP3EI

2012

√

65

Energy Utilization The City of M anan is asDangerous as the Energy Sector The Power of the City is the System of the Land Use the Power ofWork The Refrigerant Work R- 718

The first time

National Seminar on Technology and Exhibition Supports MP3EI

2012

√

66

Energy Utilization The City of M anan is asDangerous as the Energy Sector The Power of the City is the System of the Land Use the Power ofWork The Refrigerant Work R- 718

H imsar A mbarita

National Seminar on Technology and Exhibition Supports MP3EI

2012

√

67

The Influence of R-718 Refrigerant Work Fluid Utilization on the Performance of Solar Water Heaters Hot Pipe Systems

The first time

National Seminar on Technology and Exhibition Supports MP3EI

2012

√

68

The Influence of R-718 Refrigerant Work Fluid Utilization on the Performance of Solar Water Heaters Hot Pipe Systems

H imsar A mbarita

National Seminar on Technology and Exhibition Supports MP3EI

2012

√

69

Testing of Solar Water Heaters SystemsHeat Pipes Using R-718 Refrigerant Work Fluids with Variations in Pressure V there is a Collector Tilt of 40 ⁰ and 50 ⁰

The first time

National Seminar on Technology and Exhibition Supports MP3EI

2012

√

70

Testing of Solar Water Heaters Heat Pipe Systems Using Refrigerant Work Fluids R-718 with Variations in the Pressure of the V there is a Slope of Collector40 ⁰ and 50 ⁰

H imsar A mbarita

National Seminar on Technology and Exhibition Supports MP3EI

2012

√

71

Analysis of Solar Water Heaters with 20 ⁰ and 30 ⁰Collector Slope Variations on the Sun Intensity Absorbed as a Source of Heating Energy

The first time

National Seminar on Technology and Exhibition Supports MP3EI

2012

√

72

Analysis of Solar Water Heater with Collector Slope Variations 20 ⁰ and 30 ⁰ to the Sun Intensity Absorbed as a Source of Heating Energy

H imsar A mbarita

National Seminar on Technology and Exhibition Supports MP3EI

2012

√

73

Effect of Soaking Time and Percentage of Pilus Fiber on Mechanical Properties

Material of Polymer Matrix Composite

Alfian Hamsi

National Seminar on Technology and Exhibition Supports MP3EI

2012

√

74

Effect of Type Gating System on Hardness and Microstructure of Metal Matrix Composite (MMC) A356 – SiC using the Stir Casting Method

Suprianto

National Seminar on Technology and Exhibition Supports MP3EI

2012

√

75

Effect of Type Gating System on Hardness and Microstructure of Metal Matrix Composite (MMC) A356 – SiC using Stir Casting Method

Tugiman

National Seminar on Technology and Exhibition Supports MP3EI

2012

√

76

Study of Unmanned Plane Design Propellers toGet Low Noise Characteristics Based on Noise Generation Mechanism Decrease through Fluid Flow Simulation

Ikhwansyah Isranuri

National Seminar on Technology and Exhibition Supports MP3EI

2012

√

77

Study A wal Al-Mg Development for Low-Bising Unmanned Aircraft Agencies

Ikhwansyah Isranuri

National Seminar on Technology and Exhibition Supports MP3EI

2012

√

78

Simulation of Baby Incubator Space Using Phase Change Material as a Heating Incubator Room

Himsar Ambarita

Journal of e- Dynamic, Volume 4, No.4

ISSN 2338-1035

March

2013

√

79

Simulation and Making of Polymericfoam Golf BallsReinforced by Oil Palm Empty Fruit Bunches (Tks) and Nylon Fiber

Bustami Syam

Journal of e- Dynamic, Volume 4, No.4

ISSN 2338-1035

March

2013

√

80

Loss Analysis of Head in Hsd Fuel Piping System PLTU Sicanang Using Fluid Flow Analysis Program

A. Halim Nasution

Journal of e- Dynamic, Volume 4, No.4

ISSN 2338-1035

March

2013

√

81

Performance of One Cylinder Motorcycle Engine with Premium Fuel and Ethanol with Modified Compression Ratio

Tulus B. Sitorus

Journal of e- Dynamic, Volume 4, No.4

ISSN 2338-1035

March

2013

√

82

Analysis of Fuel Usage by Performing Calorific Values Against Perfomance of Steam Boilers Water Pipe Type With Steam Capacity 60 Ton / Hour

Farel H. Napitupulu

Journal of e- Dynamic, Volume 4, No.4

ISSN 2338-1035

March

2013

√

83

Effect of Addition of Magnesium to Density, Hardness ( Hardness ) and Press Strength ofAluminum Foam Using Caco3 As

Blowing Agent

Ikhwansyah Isranuri

Journal of e- Dynamic, Volume 4, No.4

ISSN 2338-1035

2013

√

84

Otto Engine Performance Study Using 96% Gasoline and Ethanol Fuel

Himsar Ambarita

Journal of e- Dynamic, Volume 4, No.4

ISSN 2338-1035

2013

√

85

Temperature Distribution Simulation On Gas Diffusion Layer A Polymer Electrolyte MembraneFuel Cell Capacity of 20 W

Sitepu’s determination

Dynamic Journal, Volume II, No.12

ISSN: 0216-7492

2013

√

86

Analysis of the Electrolysis Efficiency of Water fromHydrofill in Fuel Cells

Be sincere B.Sitorus.

Dynamic Journal, Volume II, No.12

ISSN: 0216-7492

2013

√

87

Design and Experimental Test Effect of Variations in Length of Driven Pipe and Diameter of Air Chamber

Against Hydrant Pump Efficiency

Sitepu’s determination

Dynamic Journal, Volume II, No.12

ISSN: 0216-7492

2013

√

88

Testing the Charging Process of a Solar Energy Water Heater Simple Box Type Equipped with Pcm ( Phase Change Material ) with a Collector Surface Area of 2 M ²

Sitepu’s determination

Dynamic Journal, Volume II, No.12

ISSN: 0216-7492

2013

√

89

Testing the Charging Process of a Solar Energy Water Heater Simple Box Type Equipped with a Pcm (Phase Change Material ) with a Collector Surface Area of 2 M ²

Himsar Ambarita.

Dynamic Journal, Volume II, No.12

ISSN: 0216-7492

2013

√

90

Testing the Charging Process of a Solar Energy Water Heater Simple Box Type Equipped with a Pcm (Phase Change Material ) with a Collector Surface Area of 2 M ²

M. Syahril Gultom

Dynamic Journal, Volume II, No.12

ISSN: 0216-7492

2013

√

91

Experimental and Analysis Test Effect of Speed Variation and Number of Angles on Power and Round of Axis Savonius Vertical Wind Turbines

Using the Steering Wheel

Farel.H.Napitupulu

Dynamic Journal, Volume II, No.12

ISSN: 0216-7492

2013

√

92

Design and Testing of Solar Cookers Suitable for Indonesian Conditions; Case Study of Medan City

Himsar Ambarita

Dynamic Journal, Volume I, No.13

ISSN: 0216-7492

2013

√

93

Experimental and Simulation Study on the Effect of High Density Polyethylene (Hdpe) and Asphalt Mixture Variations

Penetration of 60/70 Using the Ansys 12 Program

Alfian Hamsi

Dynamic Journal, Volume I, No.13

ISSN: 0216-7492

2013

√

94

Numerical Study on Characteristic of Stress in Shaped-Shaped Tubular Bellows

Himsar Ambarita

MEMOIRS of The Muroran Institute of Technolg. ISSN: 1344-2708

2013

√

95

Design and Testing of Solar Water Heaters with Material Changing Phase (PCM) as Medium

Heat Storage

M. Syahril Gultom

Dynamic Journal, Volume I, No.13

ISSN: 0216-7492

2013

√

96

Design of Axis Savonius Vertical Turbine Using 8 Curved Blade Fruit

Farel.H.Napitupulu

Dynamic Journal, Volume I, No.13

ISSN: 0216-7492

2013

√

97

Simulation of Fluid Flow in Fuel Cell Stacks

Polymer Electrolyte Membrane

Himsar Ambarita

Dynamic Journal, Volume I, No.13

ISSN: 0216-7492

2013

√

98

Voltage Loss Analysis and Pressure Reduction in Flow Space Against Cells

Polymer Electrolytic Membrane Type Capacity 20w

Himsar Ambarita

Dynamic Journal, Volume I, No.13

ISSN: 0216-7492

2013

√

99

Study of the effect of pour temperature on mechanical properties of casting Al-4.3% Zn alloy

Tugiman

Dynamic Journal, Volume I, No.13

ISSN: 0216-7492

2013

√

100

Study of the effect of pour temperature on mechanical properties of casting Al-4.3% Zn alloy

Suprianto

Dynamic Journal, Volume I, No.13

ISSN: 0216-7492

2013

√

101

Deep Drawing Cup Process Simulation (Basin) Stainless Steel 304 Type Plate Using

Tugiman

Journal of e- Dynamic, Volume 5, No.1

ISSN 2338-1035

2013

√

102

Response Analysis of Parking Bumpers Redesigned from Polymeric Foam Material Reinforced Oil Palm Empty Fruit Bunches (Tkks) Due to Static Press Loads

Bustami Syam

Journal of e- Dynamic, Volume 5, No.1

ISSN 2338-1035

2013

√

103

Testing the Container Charging Process for Baby Incubators Using Pcm By Using Solar Energy

Himsar Ambarita

Journal of e- Dynamic, Volume 5, No.1

ISSN 2338-1035

2013

√

104

Study of the effect of magnesium on impact strength and aluminum foam microstructure using 3% caco3 as a blowing agent

Ikhwansyah Isranuri

Journal of e- Dynamic, Volume 5, No.1

ISSN 2338-1035

2013

√

105

Study of the effect of magnesium on impact strength and aluminum foam microstructure using 3% caco3 as a blowing agent

Suprianto

Journal of e- Dynamic, Volume 5, No.1

ISSN 2338-1035

2013

√

106

Performance of Premium Cylinder and Pertamax Plus One Cylinder Motorcycle Engine with Modification of Compression Ratio

Tulus B. Sitorus

Journal of e- Dynamic, Volume 5, No.1

ISSN 2338-1035

2013

√

107

Pipe Voltage Analysis on Heavy Fuel Oil Piping System from Daily Tank Unit 1 and Unit 2 TowardsHeat Exchanger at Pltu Belawan

Bustami Syam

Journal of e- Dynamic, Volume 5, No.1

ISSN 2338-1035

2013

√

108

Experimental Study of Measurement of Transmission Loss from Aluminum-Magnesium Alloys Using Tube Impedance Method

Ikhwansyah Isranuri

Journal of e- Dynamic, Volume 5, No.1

ISSN 2338-1035

2013

√

109

Ergonomics Study of Work Facilities at Ikan Kerupuk Printing Station, Tanjung Slamat Village, Medan Tuntungan

Farida Ariani

Proceedings of the National Industrial Engineering Seminar on 28-29 August 2013, Lhok Seumawe

2013

√

110

Ergonomic Study of Work Facilities at Chicken Claw Printing Station, Bengkel Village Serdang Regency bedagai

Farida Ariani

Proceedings of the National ConferenceOn Applied Ergonomics Department of Mechanical and Industrial Engineering Faculty of Engineering on 12 September 2013, UGM

2013

√

111

Analysis of the Use of Fly Ash Palm Oil as an Alternative Material in the Making of Metal Matrix Composite (MMC) Using the Stir Casting Method

Tugiman

Proceeding of the Annual National Seminar on Mechanical Engineering XII Bandar Lampung

2013

√

112

Analysis of the Use of Fly Ash Palm Oil as an Alternative Material in the Making of Metal Matrix Composite (MMC) Using the Stir Casting Method

Suprianto

Proceeding of the Annual National Seminar on Mechanical Engineering XII Bandar Lampung

2013

√

113

Designing pen holder products through the Nigel Croos method

Bright UHSG

Journal of Industrial Engineering systems, vol.15, No.1

2013

√

114

Design of clothes hangers through the Nigel Cross method

Bright UHSG

Journal of Industrial Engineering systems, vol.15, No.2

2013

√

115

Industrial engineering design for the improvement of tempe SMEs in Sari Rejo village, polonia field district

Bright UHSG

Journal of Industrial Engineering systems, vol.15, No.2

2013

√

116

Industrial engineering design study in the rubber industry in Langkat district

Bright UHSG

INJIE Vol. 03. Journal No. 1

2013

√

117

Analysis of the calculation of the optimum value of heat from the testing of solid fuel softener

Bright UHSG

Proceeding of the Annual National Seminar on Mechanical Engineering XII Bandar Lampung

2013

√

118

Characteristics of the EngineSolar Energy Cooler with a Pair of Methanol and Activated Carbon

Tulus B Sitorus

LIPI Accredited Journal of Industrial Research (HPI) – Ministry of Industry of the Republic of Indonesia Banda Aceh,

2013

√

119

Characteristics ofMachine Cooling Solar Energy with a Pair of Methanol and Activated Carbon

Farel H.Napitupulu

LIPI Accredited Journal of Industrial Research (HPI) – Ministry of Industry of the Republic of Indonesia Banda Aceh,

2013

√

120

Characteristics ofMachine Cooling Solar Energy with a Pair of Methanol and Activated Carbon

Himsar Ambarita

LIPI Accredited Journal of Industrial Research (HPI) – Ministry of Industry of the Republic of Indonesia Banda Aceh,

2013

√

121

Recent Development and Application of Empty Fruit Bunch Fiber for Various Eco-Engineering Products

Bustami Syam

Proceedings of the 8 ^thInternational Conference on Numerical Analysis in Engineering (NAE 2013)

2013

√

122

Love Shinta Fire Capsule: Short Story Collection

Jaya Arjuna

Jakarta, US

2013

√

123

Study of Various Drying Methods for Improving the Quality of Indonesian Cocoa Beans

Farel H Napitupulu

Journal of Industrial Research, Volume 7 ISSN: 1978-5852

2013

√

124

Improvement of Indonesian Cocoa Quality Through the Drying Method

Farel H Napitupulu

Proceedings of the National Seminar on Industrial Technology Innovation, ISBN: 9794587052

2013

√

125

Improvement of Indonesian Cocoa Quality Through the Drying Method

Himsar Ambarita

Proceedings of the National Seminar on Industrial Technology Innovation, ISBN: 9794587052

2013

√

126

Improvement of Indonesian Cocoa Quality Through the Drying Method

Be sincere B.Sitorus

Proceedings of the National Seminar on Industrial Technology Innovation, ISBN: 9794587052

2013

√

127

Experimental Study of the Influence of Weather Against the Performance Performance of the Cooling Machine for Siklu Adsorption of Solar Power

Tulu B Sitorus

Proceedings of the National Seminar on Mechanical Engineering of Petra Christian University, Surabaya

2013

√

128

Experimental Study of the Influence of Weather Against the Performance Performance of the Cooling Machine for Siklu Adsorption of Solar Power

Farel H.Napitulu

Proceedings of the National Seminar on Mechanical Engineering of Petra Christian University, Surabaya

2013

√

129

Experimental Study of the Influence of Weather Against the Performance Performance of the Cooling Machine for Siklu Adsorption of Solar Power

Himsar Ambarita

Proceedings of the National Seminar on Mechanical Engineering of Petra Christian University, Surabaya

2013

√

130

Performance of Solar Dryers Integeration Systems Using Flat-Finned Plate Collectors and Thermochemical Absorbents for Drying Cocoa

Farel H Napitupulu

Journal of Industrial Research, Volume 8 ISSN: 1978-5852

2014

√

131

Performance of Solar Dryers Integeration Systems Using Flat-Finned Plate Collectors and Thermochemical Absorbents for Drying Cocoa

Himsar Ambarita

Journal of Industrial Research, Volume 8 ISSN: 1978-5852

2014

√

132

Performance Test of the Darrieus-H Wind Turbine with Naca 0012 Blade Profile and Analysis

Comparison of Efficiency Using Variations in Number of Angles and Pitch Angles

Farel.H. Napitupulu

Dynamic Journal, Volume II, No.14

ISSN: 0216-7492

2014

√

133

Effect of Antenna Position on Yagi Aluminum Antenna Wave Signal

A.Zulkifli Lubis

Dynamic Journal, Volume II, No.14

ISSN: 0216-7492

2014

√

134

Effect of pour temperature on mechanical properties and

Microstructure of A356 Castings Using the Stir Casting Method

Tugiman

Dynamic Journal, Volume II, No.14

ISSN: 0216-7492

2014

√

135

Effect of pour temperature on mechanical properties and

Microstructure of A356 Castings Using the Stir Casting Method

Suprianto

Dynamic Journal, Volume II, No.14

ISSN: 0216-7492

2014

√

136

Modeling Mechanical Parameters Tire Curves Using Bezier Functions

M.Sriri

Dynamic Journal, Volume II, No.14

ISSN: 0216-7492

2014

√

137

Correlation of Air Temperature and Solar Radiation Intensity to the Performance of the Adsorption Cycle Cooling Machine

Tulus B Sitorus

Cylinder T. Journal Unika Atmajaya Jakarta, Vol 1. No. 1

2014

√

138

Correlation of Air Temperature and Solar Radiation Intensity to the Performance of the Adsorption Cycle Cooling Machine

Farel H.Napitulu

Cylinder T. Journal Unika Atmajaya Jakarta, Vol 1. No. 1

2014

√

139

Correlation of Air Temperature and Solar Radiation Intensity to the Performance of the Adsorption Cycle Cooling Machine

Himsar Ambarita

Cylinder T. Journal Unika Atmajaya Jakarta, Vol 1. No. 1

2014

√

140

Characteristics of the Effect of Biodiesel from Liquid Palm Oil on Four-Step Diesel Engine Performance – Author of Farida Ariani, Elisabeth Ginting, Tulus B. Sitorus, “

Tulus B Sitorus

Journal of Technology Education and Education

2014

√

141

” Study of Experimental Performance of Adsorption Cooling Machines Driven by Solar Power”

Tulus B Sitorus

Proceeding on the Technology Innovation Seminar and

Industrial Engineering 2014 Andalas University

2014

√

142

Evaluation of System Configurations for Light Integration of Gasification and Fuel Cell

Taufiq bin Nur

The Society of Chemical Engineers, Japan, the 46th Autumn Meeting,

2014

√

143

Thermodynamic Modeling and Parametric Study of an Integrated Gasification Fuel Cell Combined Cycle (IGFC),

Taufiq bin Nur

11th European SOFC and SOE Forum 2014

2014

√

144

Performance analysis of an integrated gasification fuel cell combined cycle (IGFC)

Taufiq bin Nfjuur

The Society of Chemical Engineers, Japan, the 79th Annual Meeting

2014

√

145

Thermodynamic analysis of an integrated energy system based on a solid oxide fuel cell

Taufiq bin Nur

International Conference on Hydrogen Production, ICH2P-2014

2014

√

146

Performance of Solar Energy Adsorption Cooling Machines

Adsorbent of Active Carbon and Alumina Mixtures

Active

Farel H.Napitulu

Proceedings of the XII National Mechanical Engineering Seminar, UI Depok

2014

√

147

Performance of Solar Energy Adsorption Cooling Machines

Adsorbent of Active Carbon and Alumina Mixtures

Active

Himsar Ambarita

Proceedings of the National Seminar on Mechanical Engineering XII, UI Depok

2014

√

148

Performance of Solar Energy Adsorption Cooling Machines

Adsorbent of Active Carbon and Alumina Mixtures

Active

Sincere

B.Sitorus

Proceedings of the National Seminar on Mechanical Engineering XII, UI Depok

2014

√

149

Study of the Performance of Drying Cocoa Beans Using Integrated Systems of Solar Thermal Energy and Thermochemical Energy

Farel H.Napitulu

Proceedings of the National Seminar on Mechanical Engineering XII, UI Depok

2014

√

150

Study of the Performance of Drying Cocoa Beans Using Integrated Systems of Solar Thermal Energy and Thermochemical Energy

Himsar Ambarita

Proceedings of the National Seminar on Mechanical Engineering XII, UI Depok

2014

√

151

Adsorption Capacity of Activated Carbon and Active Alumina as adsorbents for several refrigerants in the Adsorption Cycle

Himsar Ambarita

Proceedings of the National Seminar on Mechanical Engineering XII, UI Depok

2014

√

152

The Effectiveness of Continuous Drying of Indonesian Cocoa Beans Using Solar Energy and Thermochemistry

Farel H Napitupulu

Proceedings of the I-National Industrial Technology National Seminar, ISBN: 9786022850151

2014

√

153

The Effectiveness of Continuous Drying of Indonesian Cocoa Beans Using Solar Energy and Thermochemistry

Himsar Ambarita

Proceedings of the I-National Industrial Technology National Seminar, ISBN: 9786022850151

2014

√

154

Experimental Study and Mathematical Modeling of the Cocoa Drying Process with Solar Energy Intermittently

Farel H Napitupulu

Industrial Research and Development Journal, ISSN: 2252-3367 Volume4.

2014

√

155

Experimental Study and Mathematical Modeling of the Cocoa Drying Process with Solar Energy Intermittently

Himsar Ambarita

Industrial Research and Development Journal, ISSN: 2252-3367 Volume4.

2014

√

156

Analysis of Mechanical Response of Lightweight Brick Structure from Concrete Foam Composite Material Reinforced TKKS Fiber to Free Fall Impact Loads

Bustami Syam

Proceeding Step-1 National Seminar on Science, Technology and Exhibition

2014

√

157

Preliminary Study of Waste Heat Utilization of Condenser Air Conditioning Systems for Clothes Dryers

A.Halim Nasution

Proceeding Step-1 National Seminar on Science, Technology and Exhibition

2014

√

158

Preliminary Study of Waste Heat Utilization of Condenser Air Conditioning Systems for Clothes Dryers

Himsar Ambarita

Proceeding Step-1 National Seminar on Science, Technology and Exhibition

2014

√

159

Theoretical Analysis of Vortex Turbines with Variations of Exhaust Hole Diameter, Water Height and Runner Diameter

M. Shahril Gultom

Proceeding Step-1 National Seminar on Science, Technology and Exhibition

2014

√

160

Theoretical Analysis of Vortex Turbines with Variations of Exhaust Hole Diameter, Water Height and Runner Diameter

A.Zulkifli Lubis

Proceeding Step-1 National Seminar on Science, Technology and Exhibition

2014

√

161

Method of Measurement of Mechanical Response of Lightweight Tile Products from Foam Concrete Composite Material Reinforced by Oil Palm Empty Fruit Bunches (TKKS) Due to Impaired Load

Bustami Syam

Proceeding Step-1 National Seminar on Science, Technology and Exhibition

2014

√

162

Mechanical Response Analysis of Concrete Foam Composite Tile Reinforced Oil Palm Empty Fruit Bunch (TKKS) Due to Free Fall Impact Loads

Bustami Syam

Proceeding Step-1 National Seminar on Science, Technology and Exhibition

2014

√

163

Noise Contour Noise Propeller Al-Mg Alloys on Unmanned Aircraft

Ikhwansyah Isranuri

Proceeding Step-1 National Seminar on Science, Technology and Exhibition

2014

√

164

Experimental Study of Noise Characteristics of Exhaust DLE Gas Engine-30 Engine as a Driver for USU NVC Prototype Crew

Ikhwansyah Isranuri

Proceeding Step-1 National Seminar on Science, Technology and Exhibition

2014

√

165

Phenomenon of Alteration of Wax Phenary in the Solar Collector Flat Plate as a Heat Energy Storage Material

Farel H.Napitupulu

Dynamic Journal Volume I, No.15

2014

√

166

Phenomenon of Alteration of Wax Phenary in the Solar Collector Flat Plate as a Heat Energy Storage Material

Himsar Ambarita

Dynamic Journal Volume I, No.15

2014

√

167

Analysis of the effect of pouring temperature on hardness and microstructure in the manufacture of “Metal Matrix Composite” with the Stir CastingMethod

Tugiman

Dynamic Journal Volume I, No.15

2014

√

168

Analysis of the effect of pouring temperature on hardness and microstructure in the manufacture of “Metal Matrix Composite” with the Stir CastingMethod

Suprianto

Dynamic Journal Volume I, No.15

2014

√

169

The Effect of Solar and Nusafuel Fuel Mixtures on One Cylinder Stationary Diesel Engine Performance

Be sincere B.Sitorus

Dynamic Journal Volume I, No.15

2014

√

170

The Effect of Solar and Nusafuel Fuel Mixtures on One Cylinder Stationary Diesel Engine Performance

Farida Ariani

Dynamic Journal Volume I, No.15

2014

√

171

Design and Manufacture of Biomass Fueled Grain Drying Equipment as an Alternative Drying Method for Rice Farmers

Be sincere B.Sitorus

Dynamic Journal Volume I, No.15

2014

√

172

Design and Manufacture of Biomass Fueled Grain Drying Equipment as an Alternative Drying Method for Rice Farmers

Suprianto

Dynamic Journal Volume I, No.15

2014

√

173

Design and Manufacture of Biomass Fueled Grain Drying Equipment as an Alternative Drying Method for Rice Farmers

Mahadi

Dynamic Journal Volume I, No.15

2014

√

174

Analysis of the Use of Economizer AgainstEfficiency and Fuel Savings Increases and Losses Head Boiler 052 B101 Steam Power Plant Unit Pt.Pertamina (Persero) Refinery Unit Iv Cilacap

Sitepu’s determination

Dynamic Journal Volume I, No.15

2014

√

175

Study of the Performance of Solar Water Heaters Hot Pipe Systems Using R-718 Refrigerant Work Fluids 

Sitepu’s determination

Dynamic Journal Volume I, No.15

2014

√

176

Study of the Performance of Solar Water Heaters Hot Pipe Systems Using R-718 Refrigerant Work Fluids 

Himsar Ambarita

Dynamic Journal Volume I, No.15

2014

√

177

Study of the Performance of Solar Water Heaters Hot Pipe Systems Using R-718 Refrigerant Work Fluids 

Farel H.Napitupulu

Dynamic Journal Volume I, No.15

2014

√